Modified Girls Sun Strips

£25.00

Clear
SKU: N/A Category:

Description

Size: 55″ wide x 9″ tall. If you are unsure on h0w to apply these then get a garage, bodyshop or professional to apply the for you. These are non refundable if you mess it up! You will need to cut the sun strip to make it fit your car windscreen as every car is different. See the guide below:

PLEASE MAKE SURE THE SURFACE IS CLEAN USING SOAP ONLY NO CHEMICALS. MAKE SURE YOU HAVE TWO PEOPLE TO APPLY THE SUN STRIP DO NOT ATTEMPT THIS ON YOUR OWN.

Fitting Sunstrips

This site is meant as a guide only, if unsure get advice from a professional.

Do not apply in extremes of temperature! Very hot or very cold days, and especially not in direct hot sunshine!!! Like any vinyl it gets softer and easier to tear and ruin when it is hot!

In cold weather all vinyls can become brittle and should not be applied below 10 degree Centigrade, if it is cold weather and the post man has just delivered it, it could have sat in sub zero temperatures, so let it warm to room temperature over night.

When you receive your sun strip it is tightly rolled, this has protected it in transit. Unwrap it and remove the labels holding it together. Loosen the roll, but don’t try to completely straighten it. It is normal for the very inside to be wrinkled. Leave it over night at room temperature and it will be more pliable and easier to apply.

If there is a problem with the sunstrip you have received let us know when it arrives. Refunds or replacement may require you to return the sunstrip. We can not be responsible for problems caused by the installer, if in doubt get help from someone who has fitted one before.

Any problems contact us.

APPLICATION

Do not apply in extremes of temperature! Very hot or very cold days, and especially not in direct hot sunshine!!! Like any vinyl it gets softer and easier to tear and ruin when it is hot!

You will need to Apply Decals

Step 1. You will need…

A water spray, ruler/measuring tape, masking tape, squeegee (a credit card with a peice of cloth wrapped around makes a good substitute), a cloth and a sharp knife.

You will need to Apply Decals

Step 2. Hold in place with masking tape

Clean the windscreen thorughly, the offer the sunstrip to the windscreen and hold in place with masking tape, ensuring the decal is correctly lined up.

You will need to Apply Decals

Step 3. Remove back half and spray with water

Remove half of the backing paper and spray a generous amount of water onto the sticker and the windscreen.

You will need to Apply Decals

Step 4. Smooth down with squeegee

Using firm pressure, smooth the sunstrip down with a squeegee, squeezing as much water out from behind the decals as is possible.

You will need to Apply Decals

Step 5. Repeat for remaing half

Repeat the above process for the remaining half of the sunstrip.

You will need to Apply Decals

Step 6. Peel away applicator tape slowly

Once as much water as possible has been squeezeed out from behind the sunstrip, allow the remainder to dry. You can use a heat gun on its lowest setting to help speed up the process.

Peel back the applicator tape slowly, at a sharp angle, ensuring the lettering remains stuck in place.

You will need to Apply Decals

Step 7. Trim away excess

This particular sunstrips is a generic fit and therefore requires trimming once in place.

With a sharp knife or scalpel, follow the edge of the windscreen, trimming away the excess sticker.

You will need to Apply Decals

Step 8. Stand back and admire!

Stand back and admire your handy work. If any air or water bubbles remain, these can be removed by lancing the vinyl with a pin or point of a knife.

 

Additional information

Design

Black with stars, Black standard Logo, Unicorn Text Design

Colour

Oil Slick

0
Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.